Sharing is caring

Automatic Egg Incubator JN-448

M Updated December 22, 2015
11397 1 2 0
Automatic Egg Incubator JN-448

Product Info

34x24x20 cm
9 chicken eggs (18 double stacked)
Power Usage

Extra Incubator Features

The JN-448 Automatic Egg Incubator is marketed by Nappole Technology and the unit fully made in China.

This incubator is rather unique as it uses turning tubes (instead of an oscillating tray) to roll the eggs automatically at preset times. The rolling action means eggs can actually be stacked on top of each other (to double the manufacturer's hatching capacity) and still all rotate at the same time.

Incubator features

This incubator has the following features:

  • Egg turning/rolling - can be set for various intervals eg 1 - 10 hours and also rolling time eg 10 seconds.  
  • Display - Digital temperature control and LCD screen.
  • Countdown - Hatching day countdown.
  • Access - Top opening lid - hinged. 
  • Egg types - Suitable for all types of eggs including reptiles.
  • Alarms - Temperature warning alarm.
  • Humidity chamber - Easy access water container to regulate humidity.  

A mini egg incubator suitable for hobbyists and breeders alike. 


Editor review

1 review
Excellent incubator for the price
(Updated: December 16, 2015)
Overall rating
Who makes this incubator?

The Jn 448 egg incubator is essentially another no brand Chinese made incubator even though it is supposedly marketed by Nappole Technology but I think they are more a seller than a manufacturer. 

Nevertheless, from my testing so far I've found this low cost egg incubator worth every penny regardless of it not technically being branded. 

Incubator design

Lid and access - My last incubator was also a cheap Chinese made unit I got off eBay (it was bigger) but I hated how the whole top section of the unit needed to be removed to check the eggs or add water etc. However, with this unit it has a top hinged lid which can be easily flipped open to gain access to the eggs and I really like that feature! 

Size - My last incubator had the capacity to hold 48 chicken eggs but the Jn 448 is significantly smaller holding only 9 single stacked with a possibility of 18 - 23 or so (if the eggs are double stacked) - more about that later. 

Overall, I have found the size of this incubator adequate and if anything I have learnt that bigger is not necessarily better when it comes to egg incubators. As a hobby backyard poultry keeper who breeds my own chickens, ducks, and quail, for eggs and meat I always thought I needed a large incubator but I have found this not to be the case for someone (like me) who is only breeding for myself and not to sell to others. 

Often, I will only incubate a dozen duck or chicken eggs at a time anyway so running a larger incubator for this amount of eggs was a waste of energy. Yes, I'm quite satisfied with my smaller incubator and if I ever need more stock I simply just incubate more often... 

Point to note: If incubating more than 9 eggs you'll need to have a brooder set-up and going for hatching time because over 9 chicks or ducklings will be too many for this sized incubator to hold. What I do is wait for about 6 or so to hatch out then I quickly open the top lid and transfer the chicks to the brooder rather than wait for all eggs to hatch out (which is the standard way to do it).  

Automatic egg turner - This is what makes this incubator different to any others I have seen and why it is able to turn more eggs than you'd expect. Instead of an oscillator the Jn 448 has a rolling mechanism via a set of PVC tubes to turn the eggs. 

Egg turning/rolling is can be programmed by interval and also turning time; for example, every 6 hours for 8 seconds - meaning the tubes will rotate and at the same time the eggs turn also. If the eggs are double stacked when the bottom eggs turn the top eggs also rotate therefore allowing for more eggs to be incubated than the floor space actually provides - pretty nifty hey!

Water tray - Eggs usually need a humidity range between 50 - 70 % for good hatch rates. This incubator has a water tray, which is easily accessed from the front of the unit. Basically, I found the tray needed filling about every 5 days and this was as simple as pulling the tray out slightly and topping it up with a small watering can. 

In some incubators the humidity level is regulated by filling water channels (the more surface area the more humidity) and this can be tricky but with the JN 448 I found the container was the perfect surface area for the unit and the humidity levels remained around the 60 - 70% mark.              
Programming LCD panel - There's not much to the LCD panel it has all the basic requirements and it's easy to understand. 


Well, to be honest there isn't any insulation! The outer box and the inner packing foam the unit comes packed with is supposed to be used as insulation. Annoyingly, I needed to cut a hole in the front of the box in order to remove/fill the water container when required otherwise I would have had to remove the whole unit from the box each time. 

At the end of the day, cutting out a hole to provide for the water container wasn't too much of an inconvenience but it is something you should know about before purchasing this incubator. NOTE: Don't throw away the outer box this incubator comes in because you'll need it!

Alternatively, you could use any other box or container with appropriate foam inside to insulate the incubator. It is possible to use the incubator as is without any outer box or insulation and it will work; however, the small heating element and fan motor will run hard to keep the temperature constant and this will greatly shorten the life of the unit so I recommend following the manufacturers instructions and use extra insulation around the unit itself.   


I paid only $88 for my incubator (this included free postage) but I see the price has gone up by at least 20% perhaps this reflects its growing popularity? I don't know, although I do still think it's a good buy and great value for money. 

I seriously considered buying a top end incubator but now I'm glad I got the Jn 448 because it does everything I need for a fraction of the cost of a big branded unit.  


Bottom line this incubator serves me well and much better than I expected. I took the gamble of buying another cheap Chinese automatic egg incubator (but a different type) and I'm glad I did! 

See the video attached to this review listing for a comprehensive video review of the Jn 448.  

Reviewer Knowledge Base

I own/owned this item

Pros & Cons

Great price
Like the top lid for easy access
Good and unique egg rolling design
Easy to program
Requires extra insulation such as a box due to the thin plastic construction
Report this review Comments (4) | Was this review helpful? 2 0


More info on forum (Related Media or Articles)
Here's some more information on our forum.
Comment on Facebook below or use our section further down to have your say...

Comments (0)

Rated 0 out of 5 based on 0 voters
There are no comments posted here yet

Leave your comments

  1. You can post directly as a guest, Or, Sign up or login to your account.
Rate this post:
Attachments (0 / 3)
Share Your Location

You Might Like

Fruit & Veg

Articles about fruit & veg growing you'll get nowhere else


Chickens, Ducks, & Quail information


Tips, Exercise, News, & Lifestyle


Latest Product Reviews

About Us

Read our story!


Join our sister site & become a member of our self-sufficient online community!


Newsletter | FAQ |  Privacy Policy | Copyright 2011 - 2017 Self Sufficient Me